These bags are universal and will work on almost any bike Using Viking Bags Hardmount saddlebag bracket system that comes with the saddlebags saving you Over 100 dollars. However for your convenience below is a list of motorcycles these bags are known to work with best.

Harley Dyna *

YOU MUST SEE THE SADDLEBAGS FITMENT INSTRUCTIONS AT THE BOTTOM OF THIS PAGE

Notes:
* Turn signal relocation may be required
** Exhaust modification may be required

Please note depending on the location you choose for your bags as well as the mounting system you use, in some cases although not listed above turn signal relocation and other modifications may be required. Please make sure to always leave enough clearance to accommodate your exhaust, suspension and other vital motorcycle components.
For Best Fitting Possible please have a quick look at the following.
Figuring out what saddlebags will fit is Very Easy

1. Measure from the top of your exhaust pipes to the fender strut which is the chrome horizontal bar located under you seat.
2. Measure from the top edge of the shock to your turn signal or brake light whichever is closer.

If you do not have a shock in the way you can measure up to the point where you seat dips down past the top of the fender strut.

You should have one inch clearance between the bottom of the saddlebag and your exhaust pipes.This is the industry standard.

Your saddlebags will rise above your fender strut once mounted so if you are off only a bit on the height of the bag take this into account.